Is Radon a Problem Where I Live in Alaska?


Radon is a big problem in Alaska. The average level for radon in Alaska is 10.7 pCi/L which is much higher than the national average of 1.3 pCi/L. Radon is a problem in Alaska, just like it is in every US state. While there are no counties in Alaska have been flagged by the EPA for having higher levels of radon than what is common, there are several boroughs that have tested out to have a lot higher levels of radon than the EPA predicted.

If you live in any of these counties, please run a radon test as soon as you can. You can do these yourself, or you can hire professionals. If you choose to run your own radon test, please visit this article to read about and pick up either the radon test kit that we recommend or our favorite radon detectors.

There are 5 counties that are in the EPA’s Zone Two (radon levels between 2-4 pCi/L) range, which is an area where radon is still a problem, but is not quite as bad as it is in the Zone One areas. It’s recommended that you test your home’s air for radon if you’re in a Zone Two area.

Finally, there are 22 counties that the EPA classified as Zone Three (radon levels between 0-1.9 pCi/L) range. Radon is more of a minor issue in these counties, but that does not necessarily mean that you’re out of the woods. There are plenty of counties that the EPA said are in Zone Three that tested out and have some really high average radon levels. There are plenty of homes that have really high levels of radon sprinkled throughout the whole nation. The only way to find out if your home has a radon issue is to test for it.

At the end of the day, counties that are marked as Zone One by the EPA have an increased risk of having a radon problem that’s really high, areas that are Zone Two have a higher risk of having a mid-level radon threat, and Zone Three counties have the lowest risk. Whatever zoning you’re in, it’s wisest to test for radon in your home. The zone designations serve as more of an idea on what you might be able to expect from your radon test results.

Here’s a borough by borough breakdown of Alaska’s radon levels, as per the EPA and radon.com. If you’d like to see the nationwide data that we collected presented on tables, then you can do so on our article here.

Is Radon a Problem in Aleutians East  Borough?

Radon is a minor problem in Aleutians East Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Aleutians West  Borough?

Radon is a minor problem in Aleutians West Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Anchorage  Borough?

Radon is a problem in Anchorage Borough, Alaska according to its average radon level. Radon levels between 2 and 4 pCi/L are known to cause lung cancer. If you live in a region with this average level of radon, you should test your home’s air immediately. If your results come back and are above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Two” Borough. This means that they found radon levels to be between 2 and 4 pCi/L. At these levels, it’s advisable to seek ways to mitigate radon levels in your home. At 2-4 pCi/L, radon is a mid-level threat to your health and is one you shouldn’t ignore. 

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Bethel Borough?

Radon is a minor problem in Bethel Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Bristol Bay Borough?

Radon is a minor problem in Bristol Bay Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Denali Borough?

Radon is a major problem in Denali Borough, Alaska according to its average radon level. Radon levels between 4 and 8 pCi/L are known to cause lung cancer and are a lot more dangerous than lower radon levels. If you live in a region with this heightened average level of radon, you should immediately test your home’s air. If your results come back as anything above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find the average radon level is between 4 and 8 pCi/L. Radon levels this high are a greater health risk than lower levels, and can be lessened with a proper radon mitigation system. If you live in a region with this high of an average radon level, then you need to invest in a radon test or a radon detector. Once you get your radon test results back, then you can decide if you need a radon mitigation system or not. If your results come back above 2 pCi/L, then you should get a radon mitigation system.

Is Radon a Problem in Dillingham Borough?

Radon is a problem in Dillingham Borough, Alaska according to its average radon level. Radon levels between 2 and 4 pCi/L are known to cause lung cancer. If you live in a region with this average level of radon, you should test your home’s air immediately. If your results come back and are above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find the average radon level is between 2 and 4 pCi/L. Radon levels between 2 and 4 pCi/L are known to cause cancer and can be lessened with a radon mitigation system. If you live in a region with this average radon level, then you should test for radon in your home. If your radon level is above 2, then a radon mitigation system can help you protect your health. 

Is Radon a Problem in Fairbanks North Star Borough?

Radon is an extreme problem in Fairbanks North Star Borough, Alaska according to its average radon level. Radon levels above 8 pCi/L are known to cause many cases of lung cancer. If you live in a region with radon levels this high, you should test your home’s air immediately. Test results above 2 pCi/L warrant an investment in a radon mitigation system in order to protect your health. If your home tests above 8, then you should act as quickly as possible to install a radon mitigation system to lessen your risk of lung cancer. 

The EPA labeled it as a “Zone Two” Borough. This means that they found radon levels to be between 2 and 4 pCi/L. At these levels, it’s advisable to seek ways to mitigate radon levels in your home. At 2-4 pCi/L, radon is a mid-level threat to your health and is one you shouldn’t ignore. 

Tests from Radon.com find the average radon level in this borough to be above 8 pCi/L. Levels this high are very alarming and are known to cause many cases of lung cancer. Fortunately, radon mitigation systems can help to get your home’s radon levels into the safe zone. If you live in a region with a radon level this high, then you need to test for your home’s radon as soon as possible. If your test results are above 2, then you should invest in a radon mitigation system. 

Is Radon a Problem in Haines Borough?

Radon is an extreme problem in Haines Borough, Alaska according to its average radon level. Radon levels above 8 pCi/L are known to cause many cases of lung cancer. If you live in a region with radon levels this high, you should test your home’s air immediately. Test results above 2 pCi/L warrant an investment in a radon mitigation system in order to protect your health. If your home tests above 8, then you should act as quickly as possible to install a radon mitigation system to lessen your risk of lung cancer. 

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find the average radon level in this borough to be above 8 pCi/L. Levels this high are very alarming and are known to cause many cases of lung cancer. Fortunately, radon mitigation systems can help to get your home’s radon levels into the safe zone. If you live in a region with a radon level this high, then you need to test for your home’s radon as soon as possible. If your test results are above 2, then you should invest in a radon mitigation system. 

Is Radon a Problem in Juneau Borough?

Radon is a problem in Juneau Borough, Alaska according to its average radon level. Radon levels between 2 and 4 pCi/L are known to cause lung cancer. If you live in a region with this average level of radon, you should test your home’s air immediately. If your results come back and are above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find the average radon level is between 2 and 4 pCi/L. Radon levels between 2 and 4 pCi/L are known to cause cancer and can be lessened with a radon mitigation system. If you live in a region with this average radon level, then you should test for radon in your home. If your radon level is above 2, then a radon mitigation system can help you protect your health. 

Is Radon a Problem in Kenai Peninsula Borough?

Radon is a problem in Kenai Peninsula Borough, Alaska according to its average radon level. Radon levels between 2 and 4 pCi/L are known to cause lung cancer. If you live in a region with this average level of radon, you should test your home’s air immediately. If your results come back and are above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Two” Borough. This means that they found radon levels to be between 2 and 4 pCi/L. At these levels, it’s advisable to seek ways to mitigate radon levels in your home. At 2-4 pCi/L, radon is a mid-level threat to your health and is one you shouldn’t ignore. 

Tests from Radon.com find the average radon level is between 2 and 4 pCi/L. Radon levels between 2 and 4 pCi/L are known to cause cancer and can be lessened with a radon mitigation system. If you live in a region with this average radon level, then you should test for radon in your home. If your radon level is above 2, then a radon mitigation system can help you protect your health. 

Is Radon a Problem in Ketchikan Gateway Borough?

Radon is a minor problem in Ketchikan Gateway Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Kodiak Island Borough?

Radon is a problem in Kodiak Island Borough, Alaska according to its average radon level. Radon levels between 2 and 4 pCi/L are known to cause lung cancer. If you live in a region with this average level of radon, you should test your home’s air immediately. If your results come back and are above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find the average radon level is between 2 and 4 pCi/L. Radon levels between 2 and 4 pCi/L are known to cause cancer and can be lessened with a radon mitigation system. If you live in a region with this average radon level, then you should test for radon in your home. If your radon level is above 2, then a radon mitigation system can help you protect your health. 

Is Radon a Problem in Lake and Peninsula Borough?

Radon is a problem in Lake and Peninsula Borough, Alaska according to its average radon level. Radon levels between 2 and 4 pCi/L are known to cause lung cancer. If you live in a region with this average level of radon, you should test your home’s air immediately. If your results come back and are above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

There aren’t enough tests from Radon.com to find the average radon level in this borough. Because of this, we need to refer to the EPA zone. Be sure to test your home’s air for radon no matter the EPA zoning to protect your health and the health of your family. 

Is Radon a Problem in Matanuska Susitna Borough?

Radon is a major problem in Matanuska Susitna Borough, Alaska according to its average radon level. Radon levels between 4 and 8 pCi/L are known to cause lung cancer and are a lot more dangerous than lower radon levels. If you live in a region with this heightened average level of radon, you should immediately test your home’s air. If your results come back as anything above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Two” Borough. This means that they found radon levels to be between 2 and 4 pCi/L. At these levels, it’s advisable to seek ways to mitigate radon levels in your home. At 2-4 pCi/L, radon is a mid-level threat to your health and is one you shouldn’t ignore. 

Tests from Radon.com find the average radon level is between 4 and 8 pCi/L. Radon levels this high are a greater health risk than lower levels, and can be lessened with a proper radon mitigation system. If you live in a region with this high of an average radon level, then you need to invest in a radon test or a radon detector. Once you get your radon test results back, then you can decide if you need a radon mitigation system or not. If your results come back above 2 pCi/L, then you should get a radon mitigation system.

Is Radon a Problem in Nome Borough?

Radon is a major problem in Nome Borough, Alaska according to its average radon level. Radon levels between 4 and 8 pCi/L are known to cause lung cancer and are a lot more dangerous than lower radon levels. If you live in a region with this heightened average level of radon, you should immediately test your home’s air. If your results come back as anything above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find the average radon level is between 4 and 8 pCi/L. Radon levels this high are a greater health risk than lower levels, and can be lessened with a proper radon mitigation system. If you live in a region with this high of an average radon level, then you need to invest in a radon test or a radon detector. Once you get your radon test results back, then you can decide if you need a radon mitigation system or not. If your results come back above 2 pCi/L, then you should get a radon mitigation system.

Is Radon a Problem in North Slope Borough?

Radon is a minor problem in North Slope Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Northwest Arctic Borough?

Radon is a minor problem in Northwest Arctic Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Prince Wales Ketchikan Borough?

Radon is a minor problem in Prince Wales Ketchikan Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Sitka Borough?

Radon is a minor problem in Sitka Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Skagway Hoonah Angoon Borough?

Radon is a minor problem in Skagway Hoonah Angoon Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Southeast Fairbanks Borough?

Radon is a major problem in Southeast Fairbanks Borough, Alaska according to its average radon level. Radon levels between 4 and 8 pCi/L are known to cause lung cancer and are a lot more dangerous than lower radon levels. If you live in a region with this heightened average level of radon, you should immediately test your home’s air. If your results come back as anything above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Two” Borough. This means that they found radon levels to be between 2 and 4 pCi/L. At these levels, it’s advisable to seek ways to mitigate radon levels in your home. At 2-4 pCi/L, radon is a mid-level threat to your health and is one you shouldn’t ignore. 

Tests from Radon.com find the average radon level is between 4 and 8 pCi/L. Radon levels this high are a greater health risk than lower levels, and can be lessened with a proper radon mitigation system. If you live in a region with this high of an average radon level, then you need to invest in a radon test or a radon detector. Once you get your radon test results back, then you can decide if you need a radon mitigation system or not. If your results come back above 2 pCi/L, then you should get a radon mitigation system.

Is Radon a Problem in Valdez Cordova Borough?

Radon is a problem in Valdez Cordova Borough, Alaska according to its average radon level. Radon levels between 2 and 4 pCi/L are known to cause lung cancer. If you live in a region with this average level of radon, you should test your home’s air immediately. If your results come back and are above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find the average radon level is between 2 and 4 pCi/L. Radon levels between 2 and 4 pCi/L are known to cause cancer and can be lessened with a radon mitigation system. If you live in a region with this average radon level, then you should test for radon in your home. If your radon level is above 2, then a radon mitigation system can help you protect your health. 

Is Radon a Problem in Wade Hampton Borough?

Radon is a minor problem in Wade Hampton Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Wrangell Petersburg Borough?

Radon is a minor problem in Wrangell Petersburg Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Yakutat Borough?

Radon is a minor problem in Yakutat Borough, Alaska according to its average radon level. Radon levels below 2 pCi/L are hard to mitigate and is less dangerous to one’s health than higher levels. However, it is still advisable to test for your home’s radon levels as radon can be a major issue in one home and not in another, even in areas where the average radon level is low.

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find that the average radon level in this borough is under 2 pCi/l. While this level of radon can be difficult to mitigate and poses a lower health risk than heightened levels of radon, it is still worth testing your own home’s air for radon. There can be homes with high radon levels even in a region with an overall lower radon average. 

Is Radon a Problem in Yukon Koyukuk Borough?

Radon is a major problem in Yukon Koyukuk Borough, Alaska according to its average radon level. Radon levels between 4 and 8 pCi/L are known to cause lung cancer and are a lot more dangerous than lower radon levels. If you live in a region with this heightened average level of radon, you should immediately test your home’s air. If your results come back as anything above 2 pCi/L, you should invest in a radon mitigation system to protect your health. 

The EPA labeled it as a “Zone Three” Borough. This means that they found radon levels to be below 2 pCi/L. At these levels, it is still advisable to test for radon levels in your home. Radon levels below 2 pCi/L are hard to reduce, but radon is a toxic gas, so it’s worth doing what you can to limit your exposure to it. At 2 pCi/L and less, radon is a low-level threat to your health, but is not one you should ignore.

Tests from Radon.com find the average radon level is between 4 and 8 pCi/L. Radon levels this high are a greater health risk than lower levels, and can be lessened with a proper radon mitigation system. If you live in a region with this high of an average radon level, then you need to invest in a radon test or a radon detector. Once you get your radon test results back, then you can decide if you need a radon mitigation system or not. If your results come back above 2 pCi/L, then you should get a radon mitigation system.

Please follow and like us:

Jonathon Silva

Jonathan Silva is our longtime Air Purifier Essentials author. He has been writing on air purification technologies for his entire professional career.

Recent Posts